사카이 타카유키  |  SKU: TAK_GB_SKYANAGI300

Sakai Takayuki Genbu (玄武) Blue #2 Sakimaru Yanigiba 300mm w/ Saya

할인가 ₩783,000 정상 가격 ₩921,000
세금 포함 배송비는 결제 시 계산됩니다.

중요: 탄소강 칼은 제대로 관리하지 않으면 금방 녹이 슬거나 파티나가 생길 수 있습니다. 정기적으로 세척하고 물기를 말린 뒤 오일을 발라 주어야 합니다. 탄소강 관리에 익숙하지 않으시다면 스테인리스강 제품을 선택하시기를 권합니다.

재고 상태

함께 사용하면 좋은 제품

상세 스펙
프로필 사키마루 타코히키 / 둥근 끝 사시미 칼
날 종류 외날
무게 293 g        10.34 oz
날 길이 292 mm   .11.5 inch
힐 높이 39 mm     .1.54 inch
힐 부분 폭 3.9 mm     0.15 inch
중간 폭 3.4 mm     0.13 inch
끝에서 1cm 폭 1.7 mm     0.07 inch
강재 청2강 / 아오가미 2호 | 탄소강
일반적인 경도 61-63 HRC
손잡이 블랙 혼 페룰 팔각 에보니

DHL Express로 전 세계 배송, 3~6일 소요(영국 제외).

The Genbu (玄武, Black Tortoise) is one of those knives that reflects the traditional knife-making heritage of Sakai particularly well. Named after the mythical guardian of the north in Japanese folklore, this series is forged by Itsuo Doi, a highly respected blacksmith who inherited the forging traditions of his father, the legendary Keijiro Doi. The Genbu brings together Doi's distinctive forging work and the refined grinding and finishing techniques for which Sakai is famous, resulting in a knife that is both a serious professional tool and a beautiful example of Japanese craftsmanship.

At the heart of the Genbu is Aogami #2 (Blue 2) carbon steel, forge-welded with soft iron cladding in the traditional Ni-mai construction. Blue 2 is one of my favourite choices for a high-end single-bevel knife, offering a good balance between edge retention, sharpness and ease of sharpening. Heat-treated to approximately 62–63 HRC, the steel is hard enough to hold a fine cutting edge through extended slicing sessions while remaining relatively straightforward to sharpen compared with some of the more wear-resistant modern steels. The soft iron cladding also makes maintaining the wide primary bevel easier, although both the core and cladding are reactive and require regular wiping and drying.

The 300mm Sakimaru Yanagiba features the distinctive rounded, sword-like tip associated with the traditional Sakimaru Takobiki profile. Compared with a conventional pointed Yanagiba, the Sakimaru has a rather elegant, understated appearance while retaining the long cutting edge that makes these knives so effective for preparing sashimi. The single-bevel geometry, combined with the long blade, allows the user to draw through a piece of fish in one continuous motion, producing a smooth and clean cut without excessive pressure or tearing of the flesh. The blade features a beautifully polished Hira with a contrasting Kasumi finish on the Kireha, creating a clean and refined appearance that suits the character of the knife.

What I particularly appreciate about the Genbu is that it doesn't try to impress through complicated Damascus patterns or decorative features. Instead, the focus is on the quality of the forging, geometry and traditional finishing. It is certainly a specialised knife that requires some experience with single-bevel sharpening and carbon steel maintenance, but for a professional sushi chef or an enthusiast who enjoys traditional Sakai craftsmanship, the Genbu offers a very appealing combination of performance, heritage and understated beauty.

관리 안내
  1. 단단한 식재료는 피해 주세요. 일본 칼은 날이 예민하여 뼈를 자르면 파손될 수 있습니다.
  2. 사용 후 중성세제로 세척하고 물기를 완전히 닦아 보관해 주세요.
  3. 식기세척기 사용은 나무 손잡이를 손상시키므로 절대 삼가 주세요.
  4. 열원 근처에 장시간 두지 않도록 주의해 주세요.
  5. 무딘 칼이 오히려 더 위험합니다. 날을 항상 날카롭게 유지해 주세요!
  6. 일본 식칼은 숫돌을 사용해 정기적으로 갈아주세요.
  7. (탄소강) 칼을 장기간 보관할 때는 녹 방지를 위해 오일을 발라주세요.
  • Sakimaru Takohiki: Japanese knife profile, sumi ink on washi

    형태: 사키마루 타코히키

    둥근 끝 사시미 칼

    사키마루 타코히키(先丸蛸引)는 간토식 사시미칼 타코히키의 한 형태로, 사카이의 한 칼 제조사는 그 칼끝을 일본도 모양으로 설명합니다. 사키마루는 둥근 칼끝이라는 뜻입니다. 같은 제조사는 이 칼이 사시미칼과 같은 일, 즉 생선 덩어리에서 회를 당겨 써는 일을 하며, 타코히키는 외날이므로 왼손잡이용은 반대로 만든다고 말합니다.

    한 일본 백과사전은 이 계열을 칼끝으로 나눕니다. 사시미칼은 얇고 좁으며, 끝이 뾰족한 것을 야나기바, 뾰족하지 않은 것을 타코히키라고 부릅니다. 사카이 제조사는 단면이 깔끔한 회를 뜨려면 칼날 전체를 따라 한 번에 당겨 썰 길이가 필요하기 때문에 사시미칼이 길고 좁다고 말하며, 가정용으로 240mm, 전문 요리사용으로 300mm 이상을 제시합니다.

    이 페이지에는 270mm에서 390mm의 사키마루 타코히키와 사키마루 야나기바가 있으며, 백2강, 청1강, 청2강 같은 탄소강(일부는 혼야키)과 은삼강, SG2, VG10 같은 스테인리스강으로 나오고, 왼손잡이용이 한 자루 있습니다. 사카이 제조사의 탄소강 관리 조언은 이렇습니다. 젖은 채로 두거나 음식물이 묻어 있으면 녹이 스니, 사용 직후 씻고 말린 뒤 기름을 발라 주세요.

    슬라이드로 더 보기 >>

  • 강재: 청2강 / 아오가미 2호

    청2강(아오가미 2호)은 프로테리얼(옛 히타치 금속)의 탄소강입니다. 프로테리얼의 표는 탄소 1.05~1.15%, 크롬 0.20~0.50%, 텅스텐 1.00~1.50%와 HRC 60 초과의 담금질 경도를 제시합니다. 프로테리얼은 청2강을 열처리 특성과 내마모성을 높이기 위해 텅스텐과 크롬을 더한 합금강으로 설명하며, 용도에 주방칼을 포함합니다.

    자매 강재인 백2강은 탄소 범위가 같고 크롬과 텅스텐은 표기되어 있지 않습니다. 어느 쪽도 일본 스테인리스강협회가 크롬 10.5% 이상으로 정한 스테인리스가 아니므로, 칼을 씻은 뒤에는 물기를 닦아 주세요.

    저희는 하츠코코로, 니가라, 묘진 리키, 안류, 마츠바라, 마사모토 소혼텐, 마자키 등 여러 제조사의 청2강 칼을 소개합니다.

    제조사:

    • 히타치금속(현 프로테리얼), 일본

    성질: 탄소강

    일반적인 경도: 61-63 HRC

    << 슬라이드로 더 보기 >>

  • 핸들 사양

    형태: 팔각 WA

    소재:

    • 에보니
    • 블랙 버팔로 혼

    블랙 에보니로 제작된 표준 팔각형 단면 및 프로파일 핸들로, 블랙 버팔로 혼 페룰이 적용되었습니다.

    << 슬라이드하여 더보기